As an Amazon Associate I earn from qualifying purchases from

Assemble a drafting tool kit

Article Image

Synopsis: Before a cutting tool makes contact with wood, Mike Korsak figures out exactly how his furniture will go together. Most of the time, he does this the old-fashioned way—with pencil and paper, making full-scale drawings. He also uses CAD software when the occasion demands. From tape measure to protractor to drawing paper, here’s a rundown of the tools and techniques he uses to draft his furniture designs.

All of the woodworking, carpentry, and timber-framing jobs I’ve held have reinforced the value of figuring something out first on paper (or with a computer) before any cutting or building took place. When I designed timber-frame structures, design work was done with a computer, using computer-aided design (CAD) software. With CAD, I built 3-D models of each frame I worked on, and these models would include every joint, fastener, connector, etc. In essence, these buildings were built twice—the first time in CAD, the second time in real life. This approach eliminated a lot of potential building mistakes at the design stage, where they could be resolved before they became a major problem at the job site.

portable drafting station
A portable drafting station. Instead of creating a dedicated drafting space in his midsize shop, Korsak pulls out a sheet of MDF as an on-demand drafting board when needed. Its smooth surface is ideal, and it can be cut to appropriate size and stowed away easily.

In my work as a furniture maker, I still subscribe to building it twice, although I do it mostly on paper, not in CAD. I’d still much rather figure out how things should go together (or not!) before I start cutting any wood, as opposed to discovering a design mistake during the build itself. To accomplish this, I generally design furniture by drafting full-scale drawings using pencil and paper.

Behind The Design: Mike Korsak’s En Pointe
Mike Korsak takes you through is design process for
one of his newest pieces, a case on stand, En Pointe

paper for drafting
Size the paper to the project. For full-size drawings, Korsak prefers a roll of wide plotter paper, which he secures with blue tape (top). For joints and other small details, instead of cutting up his large rolls of paper, Korsak just grabs a sheet of printer paper (bottom).

When drafting by hand I use the same tools and techniques that I was taught back in high school (many thanks, Mr. Miller). And since these drawings are full scale, I draw all of the furniture components at their final size. This means my drafting tool kit needs to accommodate workpieces, curves, and details big and small. My kit’s neither large nor expensive, but it also doesn’t hinder my designs no matter their complexity.

Moveable, adaptable drafting station

As much as I’d love to have a dedicated drafting table, space is limited in my shop. But full-size drawings are crucial to my process, so I found a solution: MDF laid on my workbench. I generally have it in my shop in various sizes, so I pick a piece that corresponds to the size of the drawing. MDF has a very smooth surface, so there’s no chance of a pencil veering off course like it would in the open grain of plywood or solid wood. One edge of the MDF should be true and flat for a T-square to register against.


Assemble a drafting tool kit spread

From Fine Woodworking #290

To view the entire article, please click the View PDF button below.





Behind The Design: Mike Korsak’s En Pointe

Mike Korsak takes you through is design process for one of his newest pieces, a case on stand, En Pointe

Creating Working Drawings

How to take a design idea from rough sketch to final plans

Michael Fortune’s Drawing Tricks

Michael Fortune demonstrates how to modify your drafting tools to bridge the gap between precise and artistic

Sign up for eletters today and get the latest techniques and how-to from Fine Woodworking, plus special offers.

Get woodworking tips, expert advice and special offers in your inbox


Download FREE PDF

when you enter your email address below.

View PDF

Source link

We will be happy to hear your thoughts

Leave a reply

Enable registration in settings - general
Compare items
  • Total (0)
Shopping cart